Skip navigation
Skip navigation
You are using an outdated browser. Please upgrade your browser.
Geotech G100, CO2 Incubator Analyser

The G100 gives accurate and independent CO2 verification and is easy to use and read in response to user demands.

From independent research among users, Geotech has designed its new G100 incubator CO2 analyser. The G100 is an easy-to-use, handheld CO2 analyser with increased accuracy in the 0-20 percent range and a bright, easily read display. Readings are stable thanks to inbuilt moisture removal. Timesaving twin-probes check incubator top and bottom temperatures and difference simultaneously. Increased memory holds 1000 readings. Options include O2 and/or RH analysis, temperature probes, data logging, and USB-link software to download data, analyse and export it – and to enable Internet file exchange with Geotech technical and customer support. The fully functional G100 is priced from £1000 (+VAT in UK) and is available from: Geotech G100

Research has ensured the G100 analyser is fully operable and configurable from its keypad and screen. Routine, back-to-factory service and re-calibration is recommended once a year. When due, the analyser displays a time-for-service warning but continues to work normally.

An optional ‘USB-link cable and G100 software package’ supports PC and Internet connectivity. This enables data download to a PC of the event log, user calibration and the data set for analysis, graphing, secure archiving and, if necessary, exporting to spreadsheet, word processors or e-mails. To assist users anywhere in the world, the USB-PC link and G100 software allow user settings also to be downloaded as a PC file and e-mailed to Geotech for technical support and troubleshooting. This assists remote diagnostics and service support worldwide avoiding unnecessary return to factory. It also helps ensure continued use and minimal downtime and limits time-zone lag. If necessary, the analyser firmware can be ‘flashed’ with a new Geotech software release, via website downloaded, for continuous improvement.

The G100 is shipped, boxed and complete with a gas sampling tube, an external water and dust filter, a mains charger and a user manual on a CD. It can also be supplied with an optional hard carry case to assist with protection and long operational life. Details, together with a Technical Specification sheet, a Product Data sheet, Operational Choices diagram, and an PC and Internet connectivity diagram , user manual and more are available at: Geotech G100

UK Design, Assembly and Export Success
This new product is also a UK design, assembly and export success story. For this £300K development, Geotech designers identified the best components and most economic sourcing from around the world. Sub-assemblies are made in the UK, most close to Geotech’s Leamington Spa, Midlands base. From there, seventy-five percent of the completed high-value analysers go for export.

Editor’s Notes:
Geotech has been making and supplying its Geotech-branded and OEM/distributor-branded CO2 Incubator gas analysers for more than 12 years. They are in use with CO2 incubators around the world.

Contact info.
=============

Geotech, Web: www.geotech.co.uk
E-mail: sales@geotech.co.uk Tel: +44 (0)1926 338111
Geotech, Sovereign House, Queensway, Leamington Spa, Warwickshire CV31 3JR, UK

---------------------
For Info: (Not for publication) Produced for Geotech by M&MS T: 01926 864834




This press release was distributed by ResponseSource Press Release Wire on behalf of Media & Marketing Services in the following categories: Medical & Pharmaceutical, for more information visit https://pressreleasewire.responsesource.com/about.