Skip navigation
Skip navigation
You are using an outdated browser. Please upgrade your browser.
Prosure 358 mesh fencing from Procter

Compared with other high-security fencing, Prosure 358 mesh fencing is more secure and has better aesthetics, yet it is very competitively priced.

Procter Fencing Systems is launching a new 358 mesh fencing system, known as the Prosure 358 high-security mesh panel fencing system. Consisting of 358 mesh panels, profiled steel posts and a special panel fixing design, the system is not only secure but also aesthetically pleasing thanks to all fixings being on the inside of the fencing. A galvanised finish - and with a tough green polyester coating on the panels, posts and clamps - ensures that the fencing continues to look good for many years, without any need for maintenance.

Compared with other high-security fencing, Prosure 358 mesh fencing is more secure and has better aesthetics, yet it is very competitively priced. It exceeds the requirements of BS 1722-14 'Fences. Specification for open mesh steel panel fences' and can be erected by Procter's teams of installers very quickly and easily.

Panel height is 2.4m and the maximum width is 2.515m, with 4mm wire welded to create a mesh 76.2 x 12.7mm that is extremely difficult to climb or cut (358 mesh fencing is sometimes referred to as prison mesh fencing). The profiled posts measure 66 x 80mm, and all components are available from stock.

If required, Procter Fencing Systems can also manufacture, supply and install matching pedestrian or vehicle access gates, and additional security features can be provided in the form of fence post extensions and 450mm flat wrap barb tape.

Typical applications for the Prosure 358 mesh fencing system include industrial/commercial areas, schools, hospitals, psychiatric units, young offenders' centres, prisons and other areas where a simple boundary fence would provide inadequate security.

A printable datasheet is available for the Prosure 358 high-security mesh panel fencing system from the website at www.fencingmaterials.co.uk. Alternatively, contact Procter Fencing Systems for more information by telephoning 02920 855 756 or emailing enquiries@procterfencing.co.uk

-Ends-


Contact details for publication:

Procter Fencing Systems
11 Pantglas Industrial Estate
Bedwas
Caerphilly
CF83 8XD
Tel: 02920 855 756
Fax: 02920 888 544
Email: enquiries@procterfencing.co.uk
Website: www.fencing-systems.co.uk


Notes to editors:

Procter Fencing Systems is the one of the UK's leading specialist manufacturers of fencing and gates. From its sites in Leeds, South Wales and South-East England, Procter Fencing Systems offers a comprehensive service to survey, design, manufacture and install fencing and gates nationwide. All products are designed in accordance with the requirements of ISO 9001 and all meet the appropriate health and safety standards. Procter Fencing Systems is an accredited installer under the Secured by Design scheme.


Issued by:

Jeremy Procter
Procter Brothers Ltd
11 Pantglas Industrial Estate
Bedwas
Caerphilly
CF83 8XD

Tel: 029 2088 2222
Fax: 029 2088 7005
E-mail: jeremy.procter@procterbedwas.co.uk

This press release was distributed by ResponseSource Press Release Wire on behalf of Procter Sliding Entrance Gates in the following categories: Public Sector, Third Sector & Legal, Transport & Logistics, Construction & Property, for more information visit https://pressreleasewire.responsesource.com/about.