London, UK – June 27th 2023 - AccelerComm, the Layer 1 5G IP specialist, today announced that it has released the 5G PUSCH Channel Equalizer module, which doubles network spectral efficiency, enabling significant improvements in O-RAN network performance, and as a result reducing network power and cost per bit.
The 5G PUSCH Channel Equaliser module is the latest in a series of hardware channel-based acceleration engines which leverage AccelerComm’s broad portfolio of optimised 5G Layer 1 IP modules for ASIC and FPGA, to deliver an integrated solution. The Equaliser uses innovative equalisation algorithms to cancel interference from neighbouring sources to double the throughput per Hertz (spectral efficiency) of an operator’s network.
The integration of the PUSCH channel components up to and including the Equaliser module realises further efficiencies in network performance, which translate into power savings through the reduction of the number of sites required to provide high-quality network coverage. The complete 5G PUSCH Channel Equaliser, and its component IP modules, including the Equaliser itself, and the LDPC and Polar encoder/decoder are available as configurable low gate-count IP cores optimised for ASIC or FPGA.
The LDPC module improves network performance through lower error rates, at the same time delivering power savings and over 30% processor resource saving in the 5G physical layer by offloading the LDPC algorithm into hardware.
AccelerComm has also today released a 5G PUSCH Channel Equalizer evaluation tool, which customers can download and use to assess the benefits in their own network, by setting up specific deployment use case parameters and comparing performance with the standard Matlab 5G model.
“Network efficiency lies at the centre of the success of 5G, both in terms of power consumption and the use of valuable spectrum assets,” said Eric Dowek, Segment Marketing Director. “Our innovations in modular 5G Layer 1 IP solutions, implemented efficiently on ASIC and FPGA, help deliver 5G network performance at a price point that makes good business sense.” Data for all AccelerComm IP modules can be found on the AccelerComm website Channel Coding Resources (accelercomm.com)
AccelerComm provides complete physical layer IP solutions which enable optimal performance of 5G radio access networks and solves the challenges that would otherwise limit the throughput, latency, and spectral efficiency of 5G. by mitigating the effects of noise, interference, and poor signal strength. The company is active in a number of industry associations including the O-RAN ALLIANCE and Small Cell Forum. For further information visit www.accelercomm.com or follow @AccelerComm on Twitter.
This press release was distributed by ResponseSource Press Release Wire on behalf of Temono Communications Limited in the following categories: Computing & Telecoms, for more information visit https://pressreleasewire.responsesource.com/about.