Skip navigation
Skip navigation
You are using an outdated browser. Please upgrade your browser.

The XR32-11 in-wheel motors allow the Rasa to use regenerative braking, recapturing over 50% of the kinetic energy

The Rasa hydrogen fuel cell car developed by Riversimple has been attracting a lot of attention with its innovative design and impressive performance. A key feature is its four in-wheel electric motors which directly drive the vehicle's wheels.

The thin, powerful pancake motors were developed for the UK company by Printed Motor Works, and had to meet a number of demanding requirements. One of these was the need to include an integral mount for the brake disc while maintaining the motor's external rotor design, which is necessary to produce the high torque required.

Further constraints were the use of conventional, externally mounted disc callipers, a low target weight and the need for the whole package to fit within a 15" wheel rim.

The XR32-11 in-wheel motors allow the Rasa to use regenerative braking, recapturing over 50% of the kinetic energy, and using a bank of supercapacitors in the front of the car to store the electrical power generated. This is then fed back to the motors to supply most of the power for acceleration, helping to give the two seater pre-production car a range of 300 miles.

"The four-wheel drive system enables significantly more energy to be recovered than in comparable two-wheel electric drive systems," said Martin Stevens, electronic systems engineer at Riversimple.

"Printed Motor Works worked closely with us on the design of the motor, which meets all the required torque, speed and thermal requirements. The quality of manufacture of the motors is also excellent, and they have performed faultlessly during testing."

The brushless DC motors help to keep the weight of the vehicle down, as they deliver unparalleled performance for their size, each capable of producing a peak torque of 160 Nm while weighing only 17 kg.

This power is made possible by positioning the motor's permanent magnets on an externally running rotor, so that torque is delivered on the outermost section of the motor. In addition, torque density is maximised by a high degree of slot fill by winding each of the stator teeth individually before assembly.

Riversimple are planning to produce 20 Rasas for a 12 month public trial later this year, followed by full production shortly after. Unusually, the car will only be offered for lease, with a monthly service contract rather than for purchase, with all running costs included such as servicing, road tax, insurance and even fuel.


Image captions

Image 1: This thin, powerful pancake motor was developed for Riversimple's innovative Rasa car by Printed Motor Works.

Image 2: The Rasa hydrogen fuel cell car has four in-wheel electric motors developed by Printed Motor Works.

Notes for editors

Printed Motor Works is a specialist in the custom design and manufacture of short body length motors and their integration into motion control systems. It is Europe's largest manufacturer of flat brushed DC pancake motors and a world leader in the design and manufacture of compact brushless DC motors for the industrial, aerospace, defence, medical, marine and other specialist markets. It is a pioneer in the fast growing field of in-wheel motors.

Ref: PMW316
Date: 26 May 2016

Reader enquiries:

Nick Revels
Printed Motor Works
Tel: +44 (0) 1420 594140

Printed Motor Works Ltd, Newman Lane, Alton, Hampshire, GU34 2QW, UK

Media enquiries:

Stephen Bailey
Antimony Communications
Tel: +44 (0) 1483 416807
Fax: +44 (0) 8707 656807
Mobile: +44 (0) 7010 716807

This press release was distributed by ResponseSource Press Release Wire on behalf of Antimony Communications in the following categories: Motoring, Manufacturing, Engineering & Energy, Transport & Logistics, for more information visit